Olympus PT-EP14 E-M1 MkII Housing
The PT-EP14 Underwater Housing maintains full accessibility to the camera system along with intuitive handling while diving to a depth of 60m. Constructed from a lightweight, durable polycarbonate, the housing guards against water as well as impacts and dust when above the surface.
Mechanical button and dial type controls afford direct access to the camera’s menu system for adjusting settings and navigating the menu system, and the housing also supports the use of the camera-bundled FL-LM3 shoe-mounted flash, as well as secondary flashes via optical fibre cable connection.
The housing is compatible with a wide range of M.ZUIKO DIGITAL Micro Four Thirds lenses and even some Four Thirds lenses when used with the dedicated adapters.
An interchangeable lens port system is used to permit working with a variety of Micro Four Thirds lenses, and the housing body also incorporates a removable LCD hood to enhance visibility of the camera’s rear LCD monitor and electronic viewfinder while diving.
Just like the camera it protects; this underwater housing and accessory system is also very compact and lightweight for easy handling. The PT-E14’s premium polycarbonate body has not only been engineered to keep out all moisture but also protects the camera from knocks and bumps on land, too.
- Waterproof up to 60m
- Durable, high quality polycarbonate construction
- Compact & lightweight
- Supports different lenses
- Multi-coating glass to reduce inner reflections
- Monitoring window to detect water penetration
- Underwater Wide & Macro Conversion Lenses can be directly attached
- Custom made for Olympus OMD EM 1 MKII
|Compatible model||OLYMPUS OM-D E-M1 Mark II|
|Dimensions||W: 197mm, H: 185mm, D: 126mm|
|Flash||FL-LM3 Internal Flash||Compatible|
|Optical Fibre Cable Connecter||2|
|Weight Underwater||Approx. 290 g (fresh water)
Approx. 160 g (fresh water)
|Box contents||PFC-EP12 Flash window cover, POL-EP14 O-Ring, PFUD-EP14 LCD Hood, PBC-EP08 Body Cap, PSOLG-2 Silicone Grease, SILCA-5S Silica gel, Optical fibre cable insertion slot cap, O-ring Remover, Hand strap|
In the Box:
- 1 x PT-EP14 Underwater Housing
- 1 x PPO-EP01 Standard Flat Port
- 1 x O-ring: POL-EP14
- 1 x Silicone grease: PSOLG-2
- 1 x Silica gel: SILCA-5S
- 1 x O-ring remover: PTAC-05
- 1 x Hand strap
- 1 x LCD hood: PFUD-EP-13
- 1 x Body cap: PBC-EP01
- 1 x Diffuser: PTDP-EP14
- 1 x Flash Window Cover: PFC-EP01