Ikelite 46043 DL2 DS Link Sony TTL Converter with Ikelite Connector

$556.10

or 4 fortnightly payments of $139.03 with Afterpay

SKU: 46043 Categories: ,

Ikelite 46043 DL2 DS Link Sony TTL Converter with Ikelite Connector

Product Details

Ikelite pioneered underwater TTL flash exposure for DSLR and mirrorless cameras and this is the next iteration of their world-renowned Sony TTL flash circuitry.

Key Advantages

  • Faster, more accurate, and more reliable than fibre optic TTL triggers
  • Always ready when you are – no batteries required
  • Switch between TTL and manual exposure with the press of a button
  • Supports flash exposure (EV) compensation set in the camera
  • Supports rear curtain sync
  • Improves strobe battery life and recycle time
  • One TTL converter supports a wide selection of camera models
  • Independently waterproof sealed

About Sony TTL

TTL or “Thru-the-Lens” flash metering means the camera evaluates the scene and communicates exposure information directly to the compatible flash. The camera automatically adjusts the power output of the external flash, so you don’t have to.

TTL exposure is faster and usually more accurate than setting the flash output manually. TTL can be the difference between getting a properly exposed image or not, especially when shooting fast-moving subjects and subjects that are moving towards or away from you. TTL is by far the easiest way to shoot perfectly exposed macro photography and allows you to concentrate on focus and framing.

Some people think TTL is only good for macro… but they’re wrong! When shooting wide angle or close focus wide angle (CFWA), set your camera to properly expose the background and let the DL2 adjust your strobe intensity for proper exposure of the foreground.

Ikelite was the first company to introduce TTL for underwater strobes with Sony DSLR and mirrorless digital cameras and continues to set the standard for accuracy of Sony TTL flash protocol.

Electrical flash triggering

Connecting an electrical sync cord is as quick and easy as screwing in a light bulb. Electrical triggering supports greater accuracy, faster rapid firing, and less missed flashes as compared to fibre optic triggering. Use of electrical TTL also dramatically increases strobe battery life.

A compatible Sony TTL hotshoe is necessary for TTL operation. Ikelite TTL hotshoes are designated by a yellow band at the connector end.

The ultimate flexibility

Switch between TTL and manual flash exposure modes with the simple push of a button. A super bright LED indicator light shows you which mode you are in with a quick glance. When in TTL mode, flash exposure (EV) compensation can be accessed quickly and easily through the camera’s menus. The DL2 DS Link fully supports rear curtain sync flash modes.

The DL2 DS Link is independently waterproof sealed and can be used with a wide array of camera models. Simply use a dual sync cord to fire two strobes in TTL from a single DL2 DS Link converter.

Housing Compatibility

  • Ikelite housings for Sony mirrorless cameras featuring a TTL flash hotshoe and Ikelite ICS-5 bulkhead
  • Non-Ikelite housings for Sony mirrorless cameras featuring a TTL flash hotshoe and Ikelite ICS-5 bulkhead. If you are unsure whether your housing meets these requirements, please contact us.

Camera Compatibility

  • Sony A6000, A6300, A6400, A6500
  • Sony a1
  • Sony a7C
  • Sony a7, a7 II, a7 III
  • Sony a7R, a7R II, a7R III, a7R IV
  • Sony a7S, a7S II, a7S III
  • Sony a9, a9 II
  • Sony ZV-1

Strobe Compatibility

  • DS50 strobes: above serial number 75510 with update
  • DS51 strobes: above serial number 78700
  • DS125 strobes: above serial number 7928
  • DS160, DS161 strobes: all
  • DS200 strobes: above serial number 7163
  • Not compatible with non-digital Ikelite strobes including but not limited to SS50, SS200, SS400, Ai, 100/A
  • Not compatible with SEA&SEA, INON, or other non-Ikelite strobes

Sync Cord Compatibility

  • Ikelite Housing to Ikelite Strobes # 45151
  • Ikelite Housing to Two Ikelite Strobes # 45152
  • Ikelite Housing to Ikelite Strobe # 4103.51 (out of production)
  • Ikelite Housing to Two Ikelite Strobes # 4103.52 (out of production)

Specifications

  • 82g (2.9 ounces)

In the Box

Weight 0.113398 kg
    Cart
    Your cart is emptyReturn to Shop
    Scroll to Top