AOI UH-EM1III Olympus OM-D EM1 Mk.II & Mk.III Housing
Product Details
The AOI UH-EM1III housing is designed to accommodate the Olympus OM-D E-M1 Mk.III & Mk.II mirrorless cameras.
A Port is required to make this housing waterproof (not included). Compatible with AOI/Olympus PEN Mount Ports & Extensions.
Essentially, underwater camera housings allow the user to take their non-waterproof cameras underwater, protecting the camera from water and pressure when at depth This is basically the same premise for the last 160 years since the first underwater photographs appeared.
The new AOI UH-EM1III underwater housing for the Olympus OM-D E-M1 Mk.III (Mk.II) takes it to the next level. Integrated with a new and improved optical trigger, this housing is now compatible with the Olympus RC Flash mode of the E-M1 Mk.III allows users to capitalize on one of the key features of this camera when underwater-Super FP mode. Due to the limitations of sync speed and underwater strobes in general, most photographers are stuck with shutter speeds of 1/200. With this new and improved optical trigger, photographers are now able to use Super FP Mode, TTL or Manual.
What is Super FP mode?
Super FP is a special flash mode that allows shutter speeds to be used faster than the x-sync capability of the camera-flash system.
When do we use Super FP flash mode?
When you need a wide aperture for shallow depth of field, such as when shooting macro and a bokeh effect is desired.
Or
When we are shooting fast-moving animals, the fast shutter speed will prevent motion blur due to the subject moving.
By being able to utilize these modes, photographers will no longer have to work around these limitations.
Housing Overview.
The design of the new housing reflects the wants and needs of mirrorless users. By keeping the housing compact and ergonomic, it makes it easy to handle and travel. Although small, the buttons and knobs are sensibly laid out and intuitive to the user.
To ensure that everything works as it should, the housing is pre-installed with a Vacuum Analyser & Wet Detection System. Using the supplied vacuum pump to achieve the desired internal pressure, the system will continuously analyse the internal pressure. If a change is detected, the audio and visual alarms are set off to warn the user of a possible problem.
This housing is compatible with AOI & Olympus ports & extension rings for PEN mount housings. This high-quality underwater housing is lightweight and ergonomic with all the camera controls accessible and at your fingertips. It is made of polycarbonate with a depth rating of 45 meters.
Why compromise when you can have it all? The AOI UH-EM1III housing enables you to get more out of your underwater photo system than ever before and for a great price!
It’s rugged and durable yet lightweight and compact. With extra vacuum protection and a leak detector, it’s practical, yet ergonomic and stylish. This housing is as easy to handle as a point-and-shoot camera and yet packed with extra features to enable pro-level photography.
Want even more? Just add one of many additional accessories offered by AOI to enhance your UH-EM1III housing and meet your photography needs.
Specifically designed for the successful Olympus OM-D E-M1III camera, the AOI UH-EM1III housing is also compatible with the Olympus OM-D E-M1 Mk.II using the included parts.
Camera and Lens not included
Housing Features
Durable, shock-resistant design
LED Flash Trigger, Olympus RC Flash mode compatible
Lightweight and compact
Extra protection with a Vacuum Analyzation and Wet Detection System (VWS) and secure lock
Advanced ergonomics allow use even with gloves, an extended shutter release lever is included to make the trigger easier to use when using a base tray with a handle
Clearly marked controls allow full access to essential camera functions
Full accessory package available: Compatible with most common underwater housing accessories using these connection points: 1/4” tripod thread, cold shoe mount, LCD monitor hood rails, lanyard loops, 67mm lens port thread, QRS slots and fibre optic cable ports.
A Port is required to make this housing waterproof (not included)
The housing platform gives you the option to grow as your skills do: Explore advanced possibilities with dedicated camera lenses and AOI’s PEN Mount type lens ports using the UH-EM1III housing interchangeable lens port design.
Housing Specifications
- Model: UH-EM1III (Black).
- Accommodates: Olympus OM-D E-M1 Mark III camera & Mark II with included conversion parts
- Waterproof: 45m (148 ft.)
- Main materials: Polycarbonate
- Built-in LED Flash Trigger Compatible with:
- Manual Flash Trigger (with and without Pre-Flash modes)
- Olympus RC Flash (TTL Auto, Manual, FP TTL, FP manual)
- Battery: Built-in rechargeable lithium-polymer battery (3.7V)
- Charging: USB charger DC 5V, 0.5A (not included) for approx. 1.5 hours for a full charge
- Battery operation time: Approx. 4 Days (Based on 4 X 1-hour dives per day)
- Dimensions: Approx. 194mm (W) x 128mm (H) x 145mm (D)
- Weight underwater: Approx. 950grams (LCD monitor hood & lanyard included)
- Manufacturer limited warranty: 1 Year
In The Box
- UH-EM1III Housing Body (Black)
- Body Cap / Storage Box for PEN Mount Housing
- USB Type-C Charging Cable
- Lcd Monitor Hood
- Spare O-ring for Vacuum Valve Protection Cap (1pc)
- Vacuum Pump (Valve Fitted to Housing)
- Spare Main O-Ring (1pc)
- Spare Secondary Seal Ring (1pc)
- Silicone Grease
- Silica Gel
- Lanyard
- AOI Lens Cleaning Micro Fibre Cloth
- AOI Sticker
- O-Ring Remover
- Hot Shoe to connect to housing
- MkII Conversion Kit
- User Manual